Before you can fix the problem, you must understand why your printer has stopped working. The Canon G2010 is designed with a maintenance system that manages waste ink. Every time the printer performs a cleaning cycle or prepares the printhead, a small amount of ink is flushed into an absorbent pad located at the bottom of the printer chassis.
The printer will print a status page showing D=000.0 , indicating the waste ink counter is now zero. : resetter printer canon g2010
Buy a pre-reset mainboard from eBay or AliExpress. Swapping the board resets the counter but also resets your printer’s region and serial number. Before you can fix the problem, you must
When you run a resetter, it forces the printer to believe the waste ink pad is empty, even if it is physically saturated. The printer will then unlock and resume normal operation. The printer will print a status page showing D=000
This process is the most common "hard reset" to clear system errors. : Ensure the printer is plugged in but turned off. Hold Stop/Reset : Press and hold the Stop/Reset button (triangle icon). Hold Power : While still holding , press and hold the Button Sequence Keep holding and release 5 or 6 times (depending on the specific firmware version; usually 5). Release the Initialization
After a reset, your PC might not recognize the printer. Reinstall the official Canon G2010 drivers from Canon’s website.
