Configure Dhcp On Zte Zxhn H267n Cyta

DHCP is a network protocol that allows devices on a network to automatically obtain IP addresses and other network settings from a central server. The server, in this case, the ZTE ZXHN H267N router, assigns IP addresses to devices on the network for a specified period, known as a lease. This allows devices to move around the network and connect to different networks without manual configuration.

: Launch a browser (like Chrome, Firefox, or Safari) and enter 192.168.1.1 in the address bar. : Use the default credentials unless you have changed them: (Check the sticker on the bottom of the device for specific Cyta default credentials 2. Navigate to DHCP Settings From the top horizontal menu, select Local Network In the left-hand sidebar, click on Look for the sub-section titled DHCP Server 3. Configure DHCP Parameters

| Parameter | Value | |-----------|-------| | DHCP Server | Enabled | | Start IP | 192.168.1.2 | | End IP | 192.168.1.254 | | Subnet Mask | 255.255.255.0 | | Lease Time | 1440 minutes | | DNS | Automatically from ISP (Cyta) or 192.168.1.1 |

192.168.1.100 – 192.168.1.200 → 101 usable dynamic IPs.

If you forgot the admin password, you need to factory reset the router by holding the reset button (pinhole) for 10+ seconds. This will restore defaults.