Text Widget
Aliquam erat volutpat.
Control how operators interact with the control.
| Function | Parameter # | Typical Value | Notes | | :--- | :--- | :--- | :--- | | | #2001 (X), #2002 (Y), #2003 (Z) | 10000 - 30000 mm/min | Check machine builder’s max. | | Backlash Compensation | #2005 (X), #2006 (Y), #2007 (Z) | 0 - 999 (microns) | Set to actual measured lash. | | Stroke Limit + Side | #2013 (X+), #2014 (X-) | +/- 99999999 microns | Prevents overtravel. | | Rigid Tapping ON | #1150 bit 3 | 1 (Enable) | Requires spindle encoder. | | Soft Limit Override | #6001 bit 5 | 0 (Disable for setup) 1 (Enable) | Use only temporarily. | | Battery Alarm Ignore | #1078 (bit 0) | 1 = Ignore | Dangerous; only for temporary fix. | Mitsubishi Meldas 64 Parameter Manual
CNC repair forums and part suppliers (e.g., CNC Specialty Store, Automation Direct) sometimes host PDFs. However, verify version numbers carefully, as param addresses changed between firmware revisions. Control how operators interact with the control
These are defined by the machine builder, not Mitsubishi. Refer to your machine’s ladder diagram. | | Stroke Limit + Side | #2013