: Install the charge contact strips along the rail and set up the transformer. This unit plugs into a standard household outlet (using 1.5–2 amps) and does not require a dedicated circuit. Drive Unit Placement
| Check | Acceptable Criteria | Action if Failed | |-------|----------------------|------------------| | Obstruction sensors | Stop within 5 mm of contact | Recalibrate sensitivity | | Swivel seat lock | Locks automatically at 45° and 90° | Adjust cam screw | | Speed governor | Max 0.12 m/s on straight; 0.08 m/s on curves | Reprogram controller | | Emergency lowering | Manual crank lowers with < 20 kg force | Lubricate gearbox | | Limit switches | Stops 3 cm before rail end | Reposition magnetic strips | thyssenkrupp levant stair lift installation manual
Most staircases require a minimum clear width of 30–32 inches . : Install the charge contact strips along the
A standard 110-volt outlet is required near the top or bottom of the stairs to plug in the battery charging transformer. A standard 110-volt outlet is required near the
Error: Contact form not found.