The KH-720 typically boasts a cutting force ranging from 10g to 500g (depending on the specific revision and manufacturer settings). This range is sufficient to cut through:
Avoid the included CD. Go to the manufacturer’s support page and download the latest "Windows 11 KH-700 series driver." A common mistake is selecting the wrong COM port during setup. Always check "Device Manager" to see which port the USB cable emulates (usually COM 3 or 4). cutting plotter kh-720
Insert a 45-degree blade into the holder. Extend the blade just enough to score the vinyl without cutting the backing paper. Rule of thumb: If you can feel a groove on the back of the vinyl with your fingernail, the blade is too deep. The KH-720 typically boasts a cutting force ranging
Use a drag knife with a perforation wheel (or a CB09 blade set shallow). In your software, change the line type to "Perf Cut." The KH-720 will cut small dashes, allowing you to pop out stickers by hand without a separate kiss cut. Always check "Device Manager" to see which port