Manual-adast-maxima-mh-80-2 Access

Initiate the main power and activate the hydraulic system.

Dull blades cause jagged edges and strain the motor. The MH 80-2 typically uses 16-hole cutter knives that require professional sharpening. Safety Inspections: Manual-adast-maxima-mh-80-2

Ironically, for a printing press, a digital PDF of the is inferior. Initiate the main power and activate the hydraulic system

| Specification | Value | | :--- | :--- | | | 520 x 740 mm | | Min. Paper Size | 300 x 400 mm | | Max. Printing Area | 510 x 720 mm | | Stock Thickness | 0.04 mm to 0.5 mm | | Max. Speed | 10,000 sheets per hour | | Plate Size | 605 x 740 mm | | Blanket Size | 612 x 740 mm | | Power Requirement | 380V / 3 Phase / 50Hz | Safety Inspections: Ironically, for a printing press, a

The "Maxima" series is famous for its continuous feeder with a pre-loading facility. The dedicates 15 pages to this alone.

| Interval | Action | |----------------|--------------------------------------------------------------| | Daily | Clean blankets, impression cylinders, ink rollers. Lubricate grease points (manual pump). | | Weekly | Check sheet feed board condition; clean side and front lays. | | Monthly | Inspect gripper timing; tighten drive belts if equipped. | | Annually | Gear backlash check; replace worn feed rollers; calibration of cylinder pressure. |

Adast Maxima MH 80-2 is a vintage hydraulic paper guillotine known for its heavy-duty construction and reliability in print shops. This "complete manual" essay covers its core components, operational safety, and maintenance requirements. Core Technical Specifications